一,LED display screen fixed installation method
1,Wall-mounted installation method
1)This installation method is typically used indoors or semi-outdoors;
2)LED displays are generally small in size and do not typically have space for maintenance access. The entire LED screen is removed for repairs, or it is made into a foldable integrated frame;
3)The screen is slightly larger and generally adopts a front maintenance design, meaning the screen is maintained from the front;
2,Column-mounted installation method
There are various types of column-mounted installation methods, generally used for outdoor advertising. The following are some examples.：
1)Single-column installation method: suitable for small-screen applications
2)Dual-column installation method: suitable for large-screen applications
3)Enclosed maintenance access: suitable for simple enclosures
4)Open maintenance access: suitable for standard enclosures
3,Cantilever installation method
1)This method is mostly used indoors and semi-outdoors.
2)It is generally used at the entrance of passageways and corridors, and also at the entrances of stations, train stations, and subway stations.
3)It is used for traffic guidance on highways, railways, and expressways.
4)Screen design typically employs an integrated cabinet design or a suspended structure design.
4,Suspended installation method
This installation method is very similar to the cantilever installation method, and the applications are the same. The screen adopts an integrated cabinet design, suitable for indoor and semi-outdoor screens.
5,Embedded installation method
1)The entire display screen is embedded in the wall, with the display plane flush with the wall surface.
2)Adopting a simple box design
3)Front maintenance is generally adopted.
4)This installation method can be used both indoors and outdoors, but it is generally applied to screens with small pixel pitch and small display area.
5)Generally used in building entrances, building lobbies, etc.
6,Rooftop installation method
1)Wind resistance is a key factor in this installation method.
2)Generally installed at an angle, or the module is designed with an 8°angle.
3)Mostly used for outdoor advertising displays
7,Standing installation method
1)It generally adopts an integrated cabinet design, but there are also separate column combination designs.
2)Suitable for indoor small dot pitch screens
3)Generally small display area
二,Vehicle LED screen installation method
1)The screen can be moved in real time as needed.
2)The screen can be moved in and out according to the display screen and the situation on site.
3)Adopting a truss guide rail design
4)Generally used in stage backdrops, and frequently used in television stations, concerts, and other live events.
三,LED stage screen installation method
1.The screen size is determined according to the standard screen size.
2.Ceiling-mounted screens should not be too large. Generally, they should be no larger than 6m x 10m. Exceptions include special cabinet materials and strip-type screens.
3.It is equipped with a top suspension beam and a bottom support beam. The suspension beam is used for hoisting the screen.
4.The horizontal boxes are connected by a hoisting mechanism, and the horizontal boxes are secured with locking buckles.
5.Lifting mechanisms are classified as: gear type, cone type, and bolt type.
6.Gear-type is more expensive, but more aesthetically pleasing.
7.Tapered rod type is reasonably priced and reliable.
8.Bolted bolt-type is the cheapest and most reliable, but assembly is more complicated, making it suitable for situations where repeated disassembly and reassembly are not necessary.
四,Installation method of LED fence screen for stadium
1)Advertising display around the perimeter of a football field.
2)The screen viewing angle can be adjusted according to the tilt of the support frame.
3)The face shield features a soft silicone design and a soft, curved top to prevent injury from impacts during exercise.